Featured DIN-Rail Energy Meters & Intelligent Control Switches
Precision calibration for 60 Hz operating frequencies, dual-phase 127/220 V commercial feeds, RS-485 Modbus-RTU multi-drop connectivity, and intelligent time-of-use submetering.
TOS6-40 Bluetooth Time Control Switch 35mm DIN Rail
AC 85–265 V wide range, 40 A resistive load capacity, 35 mm DIN mounting, smart countdown & loop timing.
Product Details
TOMZN 1NO 1NC DIN Rail Weekly 7 Days Programmable Switch
16 A contact rating, AC 110 V / 220 V 60 Hz compatible, quartz crystal time base, battery backup memory.
Product Details
TOMZN Bluetooth Smart Timer Switch 85–265 VAC
EasyCon wireless sync, 10 A/30 A variants, 28 customizable switching groups, transient spike withstand.
Product Details
TOMZN TOS7-B Bluetooth Smart Timer Switch 40A/63A
Heavy-duty commercial load switching, DIN-rail snap fitting, 85–265 V universal coil, remote parameter config.
Product Details
TOMZN New Type Single Phase Weekly Digital Time Switch
Microprocessor control, LCD backlight, multi-voltage (12V–240V AC/DC), anti-interference shielding.
Product Details
TORT7 Series Delay-ON Delay-OFF 10-in-1 Time Relay
0.1s to 10 days adjustable timing range, asymmetric cycling mode, industrial motor and pump sequencing.
Product Details
TOB9e-63M Smart Breaker with Real-Time Energy Metering
Active kWh, Voltage, Amperage and Watt tracking, Tuya/eWeLink IoT integration, remote trip and sub-billing logs.
Contact Us
63A/80A Voltage & Current Protector with kWh Meter
Dual-display digital readout, configurable over/under voltage cut-off, automated self-healing reclosing relay.
Contact UsMeeting Mexico City's Unique Distribution Standards & Grid Realities
Procuring metering equipment for Mexico City (CDMX) and the Greater Metropolitan Zone (Valle de México) requires deep compliance with the Federal Electricity Commission (Comisión Federal de Electricidad - CFE) and the Mexican Official Standard NOM-001-SEDE-2012.
127 V / 220 V Split-Phase & 60 Hz Calibration
Unlike European 230 V / 50 Hz architectures, central Mexico operates primarily on 127 V line-to-neutral (Fase-Neutro) and 220 V line-to-line (Fase-Fase) at 60 Hz. Our exported energy meters feature sampling DSP chips calibrated specifically for 60 Hz sinusoidal curves, eliminating phase-angle calculation drift and non-linear inductive error common with generic 50 Hz imports.
Severe Sags, Swells & Transient Immunity
The aging transmission lines and dense substation loading across CDMX's industrial belts (e.g., Vallejo, Iztapalapa) cause frequent micro-surges and brownouts. Our DIN-rail submeters incorporate internal MOV varistors rated up to 6 kV surge withstand (IEC 61000-4-5) and wide-range SMPS power supplies (85–277 V) that prevent memory wipeouts or board lockups during grid instability.
Class 1.0 & 0.5s Revenue-Grade Accuracy
Engineered under IEC 62053-21 and IEC 62053-22 international guidelines, our metering lines guarantee Class 1.0 (sub-1% error) and Class 0.5s active power measurement. This precision is essential for sub-billing commercial tenants in Santa Fe and Polanco towers, as well as verifying high-voltage CFE GDMTH peak demand charges.
| Series Category | Voltage & Frequency | Current Input | Protocol / Interface | NOM / IEC Target | Target CDMX Application |
|---|---|---|---|---|---|
| Direct-Connect Single Phase | 127 V / 220 V AC, 60 Hz | 5(60) A / 5(80) A | LCD Display, Pulse SO | IEC 62053-21, NOM-001 | Residential rentals, Cuauhtémoc apartments |
| Multi-Function Bi-Phase | 2x127 / 220 V 3-Wire, 60 Hz | 10(100) A Direct | RS-485 Modbus-RTU | IEC 62053-21, CE, RoHS | Commercial plazas, retail submetering |
| Three-Phase CT Operated | 220/380 V, 277/480 V, 60 Hz | 1.5(6) A via External CT | Modbus-RTU + 4-Quadrant | Class 0.5s, IEC 62053-22 | Industrial plants, Vallejo manufacturing |
| Smart WiFi / IoT Din Meter | 85–265 V Wide, 50/60 Hz | Up to 63 A Integrated | Wi-Fi 2.4 GHz, Tuya/MQTT | RED, CE Marked | Remote Airbnb submetering, EV charging |
Application Scenarios in the Mexico City Metropolitan Area
From high-density corporate corridors along Paseo de la Reforma to expanding industrial hubs in the State of Mexico (Edomex), our DIN-rail energy meters solve critical monitoring and power-cost allocation challenges.
Vallejo & Tlalnepantla Manufacturing Hubs
With the surge in nearshoring investments across Central Mexico, light-manufacturing facilities and CNC machine shops in Vallejo require granular branch-circuit metering to avoid high CFE Tarifa GDMTH (Gran Demanda Media Tensión Horaria) peak-period penalizations.
- RS-485 Modbus-RTU daisy-chain into centralized PLC or SCADA.
- Harmonic distortion (THD) and power factor monitoring.
- Avoidance of Código de Red 2.0 power-factor fines (<0.95).
Reforma, Polanco & Santa Fe Towers
High-rise mixed-use complexes face legal and structural constraints when dividing master electricity bills among corporate offices, luxury retail stores, and food halls. Modular DIN-rail submeters install neatly inside compact floor-level distribution enclosures.
- Tamper-proof sealable terminal covers prevent tenant fraud.
- Sub-metering multi-tenant HVAC chiller lines and VRF units.
- High DIN density: Up to 18 single-phase channels per panel.
Commercial Rooftop Solar PV & CFE Net Metering
Commercial rooftop solar under Mexico's Distributed Generation framework (Generación Distribuida <500 kWp) requires continuous validation against CFE bidirectional utility meters. Our 4-quadrant bidirectional DIN meters independently record import/export energy.
- Accurate measurement of exported solar kWh vs. self-consumption.
- Pairing with Zhejiang TMB DC MCBs & PV combiner boxes.
- Continuous zero-export inverter feed validation.
Emerging Energy & Submetering Trends in Central Mexico (2025–2030)
Understanding shifting regulatory compliance, tariff restructuring, and industrial electrification across Mexico City helps distributors and electrical contractors specify future-proof hardware.
Enforcement of Código de Red 2.0 (CRE)
The Energy Regulatory Commission (Comisión Reguladora de Energía - CRE) has intensified penalties for industrial consumers connected to medium and high voltage whose power factor falls outside 0.95–1.0. Modern DIN-rail energy meters must capture reactive inductive and capacitive power (kvarh) simultaneously, driving demand for multi-parameter instrumentation in place of basic kWh counters.
Shift from Flat Billing to Time-of-Use (Tarifa Horaria)
Under CFE's tariff methodology, power consumed during peak hours (18:00 to 22:00 in Central Mexico) costs up to 300% more than base hours. Commercial real estate developers in CDMX now insist on DIN meters featuring multi-tariff TOU registers (Base, Intermedia, Punta) to pass exact time-differentiated energy costs to office sub-tenants.
Rapid Electrification of Delivery Fleets & EV Stations
Mexico City’s environmental initiatives have led major logistics carriers (Mercado Libre, Bimbo, DHL) to establish urban EV fleet hubs across the ZMVM. Sub-metering dedicated AC Level 2 chargers inside distribution facilities requires compact, single/three-phase meters with RS-485 Modbus for Open Charge Point Protocol (OCPP) gateway reporting.
Frequently Asked Questions: Importing DIN-Rail Energy Meters to Mexico City
Direct answers for purchasing directors, electrical project managers, and distribution partners navigating technical specs, import customs, and testing standards.
Can these DIN-rail energy meters be used as official utility billing meters for CFE?
How does Zhejiang TMB ensure 60 Hz grid accuracy for Mexico instead of 50 Hz?
What communication protocols and register maps are supported for BMS integration?
What is the standard logistics timeline from China to Mexico City (CDMX)?
Do you support low minimum order quantities (MOQ) and private labeling for Mexican distributors?
Plan Your Next Submetering Project for Mexico City
Submit your electrical single-line diagrams, voltage parameters, and communication protocol requirements. Our engineering and international export team will provide a tailored quote and complete test certificates within 24 hours.
Contact Us